California Electrician PrepDIR certification and the CSLB C-10, explained Try 30 free questionsPractice test

Inland Empire CA Electrician License: Classes and Exams

Riverside and San Bernardino counties

The Inland Empire spans Riverside County and San Bernardino County, and each county has its own building office and its own steps for adopting the 2025 code. DIR certifies the electricians for both.

Sources last checked 13 November 2026

Try thirty free questions

On this page
  1. One region, two counties
  2. Riverside County permits and code
  3. San Bernardino County permits and code
  4. Where to train in the Inland Empire
  5. Where the contractor exams are given
  6. Cities in the region
  7. Your next move in the Inland Empire
  8. What people usually ask
  9. Sources behind this page

One region, two counties

Inland Empire is a region name, and it covers Riverside County and San Bernardino County. California certifies electricians statewide, so one DIR card works in both counties and in every other. The license requirements page covers the card types and the C-10 contractor license, and the General Electrician exam page covers the test.

Permits come from different offices in each county, so the next two sections treat the counties one at a time.

Riverside County permits and code

The county's Transportation and Land Management Agency runs Building and Safety for the unincorporated area. Its building standards live in Ordinance No. 457, which the county updates with each state code cycle. The Board of Supervisors' November 4, 2025 agenda item 3.18 introduced Ordinance No. 457.107 to adopt and amend the 2025 California Building Standards Code, a set that includes the California Electrical Code, and the December 9, 2025 item 3.50 asked the Board to adopt it.

The November item says the 2025 update takes effect January 1, 2026 and that the county may set more restrictive standards for local climatic, geological or topographical reasons. The local standards it lists cover construction without a permit, work exempt from permit, submittals prepared by registered design professionals, fees, refunds, ponds, agricultural registration certificates and grading. The fire code is adopted separately through Ordinance No. 787. Ask Building and Safety whether a later amendment has changed the edition.

Inside a city such as Riverside, Corona or Moreno Valley, check the city's own building office, since the county's office covers the unincorporated area.

San Bernardino County permits and code

The county's Land Use Services Department runs the Building and Safety Division for the unincorporated area. Its Building and Safety page lists the County Government Center at 385 N. Arrowhead Ave., San Bernardino, CA 92415, and the Jerry Lewis High Desert Government Center at 15900 Smoke Tree St., Suite 131, Hesperia, CA 92345, with a phone line at 909.387.8311.

The division's Information Bulletin IB-0012, updated January 1, 2026, says permit applications submitted to Building and Safety after January 1, 2026 must follow the 2025 California Building Standards Code. Applications filed earlier may follow the 2022 code if the permit is issued before July 1, 2026, and an application that expires then gets no extension.

Cities such as San Bernardino, Fontana, Ontario and Rancho Cucamonga have their own offices, so check the one that covers your address.

Where to train in the Inland Empire

Riverside County

San Bernardino County

DIR's list of approved schools shows who may enroll at each location. This site is a study aid for the exam and offers no trainee instruction.

Where the contractor exams are given

Riverside is the Inland Empire city on CSLB's California list of test centers, and Diamond Bar and Irvine sit just outside the region. PSI gives the contractor exams, each runs 3 and a half hours, and trade exams must be taken in California or Oregon.

DIR's certification exam is booked through Pearson VUE instead, and the test day page covers what to bring.

Cities in the region

Each figure below is a 2024 Census estimate.

Riverside County

San Bernardino County

Your next move in the Inland Empire

Hours count when you work them for a C-10 electrical contractor, so an employer in either county comes first. NORCO College and San Bernardino Valley College are listed as open to the public, while the Riverside/San Bernardino Electrical Training Center is listed for IBEW members only.

The Orange County page covers the schools and the Irvine test center to the west, and the Los Angeles page covers the Diamond Bar side.

What people usually ask

Which counties make up the Inland Empire?

The name covers Riverside County and San Bernardino County. Each has its own building office, and the DIR card is the same in both.

Which electrical code does Riverside County use?

Ordinance No. 457.107 was before the Board of Supervisors on December 9, 2025 to adopt and amend the 2025 California Building Standards Code, which includes the Electrical Code, effective January 1, 2026. Confirm with Building and Safety whether later amendments apply.

Which code does San Bernardino County use?

Applications submitted to Building and Safety after January 1, 2026 follow the 2025 California Building Standards Code, according to Information Bulletin IB-0012.

Where can I train as an electrician in the Inland Empire?

DIR's list includes NORCO College, WECA's Riverside facility, San Bernardino Valley College, Chaffey College in Chino and a members only IBEW center in San Bernardino, among others.

Where do I take the contractor exam in the Inland Empire?

Riverside is the Inland Empire city on CSLB's list of PSI test centers, with Diamond Bar and Irvine just outside the region.

Check yourself

Thirty free questions, twenty of them on a timer, with the math shown on every miss

Get one wrong and you see the arithmetic worked through and the NEC section that settles it, so you know which step slipped, and you can do all of it without an account.

We wrote these questions for practice. None is a real exam question, and no bank of questions can promise you a pass.

Sources behind this page

Trojan Digital Marketing writes these practice questions for the electrician exam sites it runs in several states, so most of the 449 here also sit in those sites' banks, and none of them is a real exam question.

On the ECU certification exam you can look things up, but only in the books the testing system puts on screen, and the NEC there is the 2023 edition. Your own copy stays home. CSLB's C-10 trade exam is closed book.

California approves the schools electrician trainees enroll in and the providers that teach continuing education. California Electrician Prep is neither one, so time spent here doesn't count toward the related and supplemental instruction a trainee has to be enrolled in.

California Electrician Prep is a Trojan Digital Marketing guide with no affiliation, endorsement or sponsorship from the DLSE Electrician Certification Unit, the Contractors State License Board, CPS HR Consulting, Pearson VUE, NFPA, or any other licensing authority, school or union.

The names NEC and National Electrical Code are registered trademarks belonging to NFPA (the National Fire Protection Association).

An email when DIR or CSLB changes an exam rule

DIR's candidate bulletin and CSLB's exam pages set the exam rules and the code edition, and CCR Title 8 and CSLB's fee list set the fees. When one of them changes an exam rule, a fee or the code edition, you get a single email that names the source. Every email has a link that takes you off the list at once.